4-day Hands-on Cisco Authorized Course
Course Description
In this course, you will get an advanced overview of the features and functions of the Cisco ONS 15454 MSTP and you'll learn to perform many of the tasks required to successfully turn up an ONS 15454 MSTP network.
You will learn how to install internal connections and provisionable patchcords, so protected circuits can be installed using optical channel client connection and optical trail. You will learn how to configure the Muxponder_2.5G_10G Card and 10 Gigabit transponders, and you will provision the add-drop multiplexer (ADM-10G) subnetwork, configure optical protection, and install protected time-division multiplexing (TDM) circuits. You will examine how microelectromechanical systems (MEMS) technology enables the mesh network, and you will configure a two-ring mesh network and install protected circuits.
This advanced course is designed to give you significant hands-on time to validate the lessons learned in lecture using the comprehensive classroom hardware and lab.
Course Objective
After completing this course the student will learn how to:
- Install internal connections and provisionable patchcords
- Install optical channel client connections and optical trail circuits
- Provision the 10-Gigabit muxponder and 10-Gigabit transponders and connect with circuits
- Provision the ADM-10G subnetwork
- Provision optical protection in the ADM-10G subnetwork
- Install protected circuits in the ADM-10G subnetwork
- Provision the mesh node, which consists of the WXC, 40-MUX, and 40-DMX cards
- Provision the mesh network
- Install protected circuits in the mesh network
Intended Audience
Network professionals responsible for installation, deployment, and maintenance of the Cisco ONS 15454 MSTP. Network operations personnel, planners, and designers will also benefit.
Prerequisites
Network Topology
ONS 15454 Multiservice Transport Platform (MSTP)Advancedv8.5(OMSTPA) is designed to give you significant hands-on time with the comprehensive classroom hardware and labs.
You will learn how to install internal connections and provisionable patchcords, so protected circuits can be installed using optical channel client connection and optical trail. You will learn how to configure the Muxponder_2.5G_10G Card and 10 Gigabit transponders, and you will provision the add-drop multiplexer (ADM-10G) subnetwork, configure optical protection, and install protected time-division multiplexing (TDM) circuits. You will examine how microelectromechanical systems (MEMS) technology enables the mesh network, and you will configure a two-ring mesh network and install protected circuits
| Network Topology |
 |
Course Outline
- Cisco ONS 15454 MSTP System Overview
- Cisco ONS 15454 MSTP and DWDM Metro Networks
- Multiservice Provisioning Platform (MSPP) and MSTP Differences and Features
- Documentation
- Cisco Transport Controller Operations
- Safety
- MSTP Rings
- Ring Installation
- Ring Verification
- Internal Patchcords and Provisionable Patchcords
- Internal Patchcords
- Provisionable Patchcords
- When to Use
- 10 Gigabit Transponders and Muxponders
- 4 2.5G to 10G Muxponder
- 10G Transponder
- Installation and Settings
- Provisionable Plug-In Modules
- Install Circuits
- ADM-10G "MSPP on a Blade"
- Overview
- Installation and Settings
- Optical Protection in the ADM-10G
- Protected Circuits in the ADM-10G
- Automatic Circuits
- Manual Circuits
- Manual Multiring
- Using Cisco Transport Planner to Design Manual Multiring
- Pros and Cons of Manual
- Mesh Networks
- Mesh Topologies
- WXC Card Operation Using MEMS Technology
- Signal Flow in the Mesh Network
- Circuits in the Mesh Network
- Troubleshooting
Course Labs
- Lab 1: Connect to Network Using Cisco Transport Controller
- Lab 2: Configure Cisco ONS 15454 MSTP Amplified Ring
- Lab 3: Configure Protected Circuits Using Internal Connections and Optical Channel Client Connections
- Lab 4: 10G Muxponders and Transponders
- Lab 5: Establish ADM-10G Subnetwork
- Lab 6: Establish Protection Groups for SONET/SDH in ADM-10G Subnetwork
- Lab 7: Automatic Circuits in the ADM-10G Subnetwork
- Lab 8: Manual Circuits in the ADM-10G Subnetwork
- Lab 9: Designing Manual Multiring
- Lab 10: Provision Mesh Network
- Lab 11: Circuits in the Mesh Network
- Lab 12: Advanced Troubleshooting
|
