|
Course Description
Course Objectives
Intended Audience
Prerequisites
Course Outline & Labs
Remarks about CCI's SAN Training
"CCI's instructor was very knowledgeable in the SAN area and his willingness to discuss topics raised by the participants, very remarkable.”
Stephen Chen
Systems Manager
SBC
"The instructor's real world experience was a tremendous advantage to the course.”
Attendee from the
Indy Mac Bank |
|
Interconnecting Cisco Networking Devices Part 2 (ICND2) v1.0 - 5-day Hands-on Cisco Authorized Course
Course Description
This hands-on Authorized Cisco course builds on the foundation provided by ICND1 (Interconnecting Cisco Network Devices 1), providing a technical foundation for the rest of the Authorized Cisco curriculum. Whether your goal is to familiarize yourself with Cisco technology or to become a Cisco Certified Internetworking Expert, ICND1 and ICND2 are the place to start.
This course not only delivers essential information needed to pass the CCNA certification exams, but it also includes comprehensive hands-on reinforcement to ensure that you add skills and not just knowledge. If you are new to Cisco, ICND2 prepares you for the tasks you will face on the job.
Course Objectives
What You'll Learn:
- Review how to configure and troubleshoot a switch and router in a small network environment
- Expand the switched network from a small to medium network environment
- Dangers of redundant switching
- Spanning Tree
- Concepts of VLANs and trunking
- Implementing VLSM
- Configure, verify, and troubleshoot OSPF
- Configure, verify, and troubleshoot EIGRP
- Determine when to use access control lists (ACLs)
- Configure, verify, and troubleshoot ACLs
- Configure NAT and PAT
- IPv6 addressing
- Configure PPP, CHAP, and PAP
- Frame Relay operation
- VPN solutions
Intended Audience
ICND2 is designed for those who have a firm background in data networking, have some hands-on experience with Cisco routers and switches, and are looking to increase their knowledge of installation, maintaining, and troubleshooting medium-sized switched and routed networks or for those who are looking to achieve the first level of Cisco certification, the CCNA. We strongly recommend that other students start with ICND1.
.
Prerequisites
ICND2 assumes a basic working knowledge of bridges and routers and a complete understanding of the OSI model, IP addressing, and IP subnetting. ICND1 is recommended and builds a strong foundation for this course. Understanding Networking Fundamentals and TCP/IP Networking also serve as prerequisites. ICND1 - Interconnecting Cisco Network Devices 1
Course Outline & Labs
- Small Network Implementation
- Review Lab: Review of a Small Network Environment
- Medium-Sized Switched Network Construction
- Implementing VLANs and Trunks
- Improving Performance with Spanning Tree
- Routing Between VLANs
- Securing the Expanded Network
- Troubleshooting Switched Networks
- Medium-Sized Routed Network Construction
- Reviewing Routing Operations
- Implementing VLSM
- Single Area OSPF Implementation
- Implementing OSPF
- Troubleshooting OSPF
- EIGRP Implementation
- Implementing EIGRP
- Troubleshooting EIGRP
- Access Control Lists (ACLs)
- ACL Operation
- Configuring and Troubleshooting ACLs
- Address Space Management
- Scaling the Network with NAT and PAT
- Transitioning to IPv6
- LAN Extension into a WAN
- Establishing a Point-to-Point WAN Connection with PPP
- Establishing a WAN Connection with Frame Relay
- Troubleshooting Frame Relay WANs
- Introducing VPN Solutions
Labs
- Lab 1: Implementing a Small Network (Review Lab)
- Using the skills that you acquired or learned in the ICND1 course, configure your workgroup switch and router with a basic configuration based on the network information provided.
- Lab 2: Configuring Expanded Switch Networks
- Expand the switch configuration to meet specific VLAN and network requirements.
- Lab 3: Troubleshooting Switched Networks
- Utilize troubleshooting methods discussed to gather symptoms, isolate problems, and correct the problems commonly found in a switched network.
- Lab 4: Implementing OSPF
- Configure your workgroup routers to use the dynamic routing protocol OSPF.
- Lab 5: Troubleshooting OSPF
- Utilize troubleshooting methods discussed to gather symptoms, isolate problems, and correct the problems commonly found when running the OSPF routing protocol.
- Lab 6: Implementing EIGRP
- Configure you workgroup routers to migrate from OSPF to EIGRP.
- Lab 7: Troubleshooting EIGRP
- Utilize troubleshooting methods discussed to gather symptoms, isolate problems, and correct the problems commonly found when running the EIGRP routing protocol.
- Lab 8: Implementing and Troubleshooting Access Control Lists (ACLs)
- Create and troubleshoot IP ACLs.
- Lab 9: Configuring NAT and Port Address Translation (PAT)
- Configure your workgroup router to use PAT.
- Lab 10: Implementing IPv6
- Allocate and configure IPv6 addresses on your workgroup routers.
- Lab 11: Establishing a Frame Relay WAN
- Using the serial interface, create a Frame Relay connection to the Core.
- Lab 12: Troubleshooting Frame Relay WANs
- Utilize troubleshooting methods discussed to gather symptoms, isolate problems, and correct the problems commonly found in a Frame Relay network.
|
Interconnecting Cisco Networking Devices Pt. 2
