5 Day Hands-On Lab & Lecture Course
Course Description
Implementing Cisco Unified Communications IP Telephony Part 2 (CIPT2) v7.0-v6.0 prepares you for implementing and configuring, a Cisco Unified Communications Manager solution in a multisite environment. This course focuses on Cisco Unified CallManager Release 7.0, the call routing and signaling component for the Cisco Unified Communications solution. It also includes H.323 and Media Gateway Control Protocol (MGCP) gateway implementation, the use of a Cisco Unified Border Element, and configuration of Survivable Remote Site Telephony (SRST), different mobility features and voice security.
If you have Cisco Unified CallManager Release 6, while this class was developed for Release 7, the class contains the same content as CIPT2 v6.0, plus additional content related to Release 7.
This course includes lab activities in which you will apply a dial plan for a multisite environment, configure survivability for remote sites during WAN failure and implement solutions to reduce bandwidth requirements in the IP WAN. You will also enable call admission control (CAC) and automated alternate routing (AAR), a feature that allows rerouting of calls over the public switched telephone network (PSTN) in case of no available bandwidth. There are labs for implementing Cisco Unified Communications Manager Device Mobility, Cisco Unified Communications Manager Extension Mobility, Cisco Unified Mobility, and voice security.
Course Objectives
What you will learn:
- Describe the issues in multisite deployments and their solutions, and describe and configure required dial plan elements
- Implement call-processing resiliency in remote sites using SRST, MGCP fallback, and Cisco Unified Communications Manager Express
- Implement CAC to prevent oversubscription of the IP WAN
- Implement Cisco IOS Tcl and VoiceXML applications, along with mobility features such as Cisco Unified Communications Manager Device Mobility, Cisco Unified Communications Manager Extension Mobility, and Cisco Unified Mobility, so that users are reachable via their office phone numbers, regardless of their physical location and the various devices they may use.
- Secure a Cisco Unified Communications IP telephony deployment
Intended Audience
The primary audience for this course is as follows:
- Network designer
- Network administrator
- Network engineer
- Network manager
- Systems engineer
Prerequisites
The knowledge and skills that a learner must have before attending this course are as follows:
- Working knowledge of converged voice and data networks
- Working knowledge of MGCP, session initiation protocol (SIP), and H.323, as well as their implementation on Cisco IOS gateways
- Ability to configure and operate Cisco routers and switches
- Ability to configure and operate Cisco Unified Communications Manager in a single-site environment
- Attendance in CIPT1 v7.0 is strongly recommended
Course Outline
- Course Introduction
- Overview
- Course Goal and Objectives
- Course Flow
- Additional References
- Your Training Curriculum
- Module 1: Multisite Deployments
- Lesson 1: Identifying Issues in a Multisite Deployment
- Lesson 2: Identifying Solutions for a Multisite Deployment
- Lesson 3: Implementing Multisite Connections
- Lesson 4: New Dial Plan Features – Release 7.x
- Lesson 5: Implementing a Dial Plan for Multisite Deployments
- Module 2: Centralized Call-Processing Redundancy
- Lesson 1: Examining Remote Site Redundancy Options
- Lesson 2: Implementing SRST and MGCP Fallback
- Lesson 3: Implementing Cisco Unified Communications Manager Express in SRST Mode
- Module 3: Bandwidth Management and Call Admission Control
- Lesson 1: Implementing Bandwidth Management
- Lesson 2: Implementing Call Admission Control
- Module 4: Features and Applications for Multisite Deployments
- Lesson 1: Implementing Call Applications on Cisco IOS Gateways
- Lesson 2: Implementing Device Mobility
- Lesson 3: New Phone Features and Services – Release 7.x
- Lesson 4: Implementing Extension Mobility
- Lesson 5: Implementing Cisco Unified Mobility
- Module 5: IP Telephony Security
- Lesson 1: Understanding Cryptographic Fundamentals and PKI
- Lesson 2: Understanding Native Cisco Unified Communications Manager Security Features and Cisco Unified Communications Manager PKI
- Lesson 3: Implementing Security in Cisco Unified Communications Manager
Course Labs
- Lab 1-1: Implementing Basic Multisite Connections
- Lab 1-2: Implementing Multisite Dial Plans
- Lab 1-3: Implementing + Dialing and Globalization
- Lab 2-1: Implementing Cisco Unified SRST and MGCP Fallback
- Lab 2-2: Implementing Cisco Unified Communications Manager Express as SRST Fallback
- Lab 3-1: Implementing Bandwidth Management
- Lab 3-2: Implementing CAC
- Lab 4-1: Enabling the Device Mobility Feature
- Lab 4-2: Implementing 7.x Features
- Lab 4-3: Implementing Cisco Unified Communications Manager Extension Mobility
- Lab 4-4: Implementing Cisco Unified Mobility
- Lab 5-1: Implementing Security in Cisco Unified Communications Manager
|
